Before dyeing our shoes we must be clear if what we want is to repair the color of the skin, which has suffered scratches, wear or discoloration, repigmenting it the same original color and thus returning it to a uniform color and appearance, or changing color of our footwear even from dark to light colors, be it leather or canvas.<\/p>\n
In the first place we see that a repigmentation with a\u00a0repairing dye for footwear<\/strong>\u00a0is much easier to carry out.\u00a0At Tarrago we recommend two essential products specially created for this purpose:\u00a0Tarrago Self Shine Color Dye<\/a>\u00a0and\u00a0Tarrago Quick Color<\/a>\u00a0, both of which stand out for their great variety in the color chart;\u00a070 plus 6 metallic.<\/p>\n Due to their high covering power, applying these\u00a0repairing dyes for footwear is simple, since they are for domestic use and are not harmful to health or the environment. It is enough that, as always, we follow the instructions in the technical sheet of each product, clean the footwear well of dust or grease and respect the drying times.<\/p>\n Something more complicated will be to\u00a0dye our shoes<\/strong>\u00a0with a different color from the original, it is a somewhat more complicated process that requires following a few more steps.<\/p>\n The most important part of shoe dyeing is the preparation of the leather.\u00a0Cleaning and removal of finishes is essential before application.<\/p>\n First you have to rub with a gray fiber \/ scotch brite type scourer soaked in\u00a0Tarrago Conditioner.<\/a>This product, thanks to its stripping power, opens the pores of the skin, facilitating the anchoring and subsequent fixation of the shoe dye.\u00a0In the case of not difficult and not so deteriorated finishes, you can also use the Tarrago Preparer<\/a> (included in the double presentation of the\u00a0Tarrago Color Dye\u00a0), its formulation is less aggressive and will provide a good result.<\/p>\n To achieve a satisfactory dyeing, we recommend the following steps:<\/p>\n First, paint with the brush the areas of difficult access, for example, the joint between the sole and the skin, seams, etc.\u00a0with\u00a0Tarrago Self Shie Color Dye<\/a>\u00a0\u00a0 to tint the rest of the surface, it can be applied with a sponge.\u00a0Apply a small amount to the sponge with the brush and rub gently in a circular motion, applying a very thin layer.<\/p>\n With these products, the dyeing will remain solid and resistant to possible rubbing, both dry and wet, and bending to which said leathers are subjected.<\/p>\n Remember that it is important to remove the bottom of the container until a homogeneous color is achieved before use and use latex gloves.<\/p>\n If you want extra protection, you can apply a layer of\u00a0 Tarrago Water Based Lacquer<\/a> Matt\u00a0 or Gloss.<\/a><\/p>\n
\nThanks to the association of coloring resins and a beeswax emulsion, these products penetrate deeply, restoring the original tone and nourishing our footwear at the same time.<\/p>\nStopped process<\/h2>\n
App<\/h2>\n
\n